Portable Pulse Laser Cleaning Equipment-Laser Cleaning Machine-YIDA Laser Technology Co., Ltd.-laser cutting|Fiber Laser|Metal cutting|high power laser

Portable Pulse Laser Cleaning Equipment / Laser Cleaning Machine

手持脉冲清洗机

Laser Cleaning Machine

Portable Pulse Laser Cleaning Equipment

Overview

"Material Surface Cleaning Expert"

Easy to install, operate and automate. Do not need any water or chemical for surfacing cleaning. Laser cleaning manage to clean all kinds of surface effectively which contains resin, oil, stains, dirt, rust, coating or paint.

Laser cleaning has the characteristics of non-contact cleaning. It not only be used to clean organic pollutants, but also others like metal rusty surface, metal particles, dust, etc. The cleaning application including: rust， pain, glue, coating & plating removal, Oil stains, and for Cultural relics restoration.

Zero damage to substrate

No contact, and zero damage to the base material. Because there is no direct physical contact during the cleaning process, there is no physical damage to the piece

Wide applicability

Wide applicability and good cleaning effect. The laser orientation is good, can be accurately positioned to selectively work selectively, not limited by the surface appearance of workpiece, adapted to a variety of cleaning objects; the cleaning process can be accurately controlled to achieve the desired cleaning effect.

simplicity of operator

Laser washer is easy to use, flexible and easy to operate. Laser cleaning handheld series equipment is not only mobile, but also very convenient to carry, light working head, long time operation; automatic laser cleaning machine can be installed in the sports platform, robot and other sports mechanism, to achieve stable automatic cleaning, simple operation.

highly cost effective

Green and environmental protection, highly cost-effective. The cleaning process only consumes electricity, and the long-term cleaning cost is low.

YIDA Laser Technology

A Model Laser Cleaning Machine

Laser Power	Laser Wave Length	cooling method	Size	Working Width
1500W	1064nm	Water cooling	12006801000mm	0-150mm
2000W

B Model Laser Cleaning Machine

Laser Power	Laser Wave Length	cooling method	Size	Working Width
100W	1064nm	Air cool	12006801000mm	0-60mm
200W
500W		Water cooling
1000W

Laser cutting can be used in different field according to application.

rail transit

Aerospace

Automobile manufacturing

Ship manufacturing

Kitchen utensils

Elevator manufacturing

Sheet metal processing

Household Electric Appliances

CypCut sheet cutting software is an in-depth design for fiber laser cutting industry. It simplifies complex CNC machine operation and integrates CAD, Nest and CAM modules in one. From drawing, nesting to workpiece cutting all can be finished by a few clicks.

Auto Optimize Imported Drawing
CypCut will automatically optimize the errors when import drawing, delete duplicates and invisible graphic, smooth curve and join line segments etc.
Graphical Cutting Technique Setting
Graphical design of technique setting, quick and easy to finish setting of lead line, micro-joint and kerf width compensation etc. of single or large quantity parts.
Flexible Production Mode
CypCut provides floating and workpiece coordinates for small and large quantity production.
Statistic of Production
Thorough and timely statistic of machine production to help you manage the task schedule.
Precise Edge Finding
Support capacitance and photo-electric sensing to find workpiece edge and offset sheet placement angle.
Dual-Drive Error Offset
Auto correct the dual-drive position error each time after machine axes return origin.

FSCUT7000 is EtherCAT system developed for ultrafast picosecond and femtosecond laser precision cutting. Adopting latest algorithm and EtherCAT technology, by standard communication protocol and parallel PLC, it can achieve high speed and precision laser control of 0.1um~10um interval (PSO), and highly automated production.

Technical Data

Control software	UltraCut
Bus station	CypTronic-EP PC
I/O station	HPL2720E BUS I/O terminal board
I/O station	BCL4516E BUS I/O extension board(optional)
Power supply	24V DC/5A
PSO	Support 9 laser control modes, laser on interval 0.1μm-10μm can be adjusted
Motor control	Support up to 32 EtherCAT servo axes control in same time
Extension	Support up to 32 EtherCAT I/O stations
Acceleration	Maximum control acceleration 5G
Precision	Theroical control precision ±1um
Work environment	Temperature: 0~60℃
Work environment	Humidity: 10%~90%RH(no condensation)

Benefits

Function Features	Support laser position synchronized output (PSO function), laser output interval 0.1-10μm.
	Support 9 laser control modes, and compatible with various ultrafast laser brands.
	Communicate with laser by RS232 and Ethernet for parameter and status access.
	Support technique of transition line, lead line, Fly Cut, speed turning point, speed adjust in curve position.
	Support dual-Y structure production.
	Support to edit and execute parallel PLC process.
	Compatible with ModbusTCP, ADS and other standard protocols to guarantee online production.
	Provide optional vision positioning module to locate production by circle and cross mark.
Control performance	Communication: RTOS real time core, signal cycle 1ms.
	Precision: control precision 1μm.
	Support compensate pitch error from interferometer measure data, also support offset mechanic orthogonality.

Application

Applied in ultrafast picosecond and femosecond laser precision cutting. Widely used in fragile material cutting like glass, ceramic, display screen, semiconductor and photovoltaic materials etc.

This product specification may differ from the description subjected to countries rules and regulation. We reserve the right to amend according to technology, equipment model, price and range of accessories. Please contact your local agent to find out more about our products.

Previous:Portable Continuous Laser Cleaning Equipment

Next:No!

Return to the list

Laser cutting solutions Provider

Laser Cleaning Machine